Close
Close
Help Center Smart Home Devices Door Locks Kwikset Obsidian How to Program the Kwikset Obsidian to the Your Panel

How to Program the Kwikset Obsidian to the Your Panel

When you are ready to set up your Kwikset Obsidian smart door lock, you will need to program it into your panel. Z-Wave devices are compatible with a variety of systems. Click on your panel below for instructions specific to your system. If your system is not represented below, you can text a Support Representative any time for programming instructions at 469.513.8685.

IQ2 GC2 Simon XTi Simon XT

Qolsys IQ Panel 2 and Z-Wave Pairing Instructions:

  1. Press or swipe down clock display at top for Settings Tray, then press Settings.

    2. Door_Lock_01.jpg Door_Lock_02.jpg


  2. Press Advanced Settings, then enter the default installer code 1111.

    3. Door_Lock_03.jpg Door_Lock_04.jpg


  3. Press Installation, then Devices.

    4. Door_Lock_05.jpg Door_Lock_06.jpg


  4. Press Z-Wave Devices, Add Device, then Pair.

    5. 003.5 Z-Wave Selection Door_Lock_07.jpg Door_Lock_08.jpg


  5. IQ Panel 2 enters Z-Wave learn mode.

    6. Door_Lock_09.jpg


  6. Press the A button on the lock interior one time. The red LED light will illuminate when the lock enters add mode.

    7. Obsidian A Button for Add


  7. If successful, the IQ Panel 2 displays device settings, press Name, then select the name.

    8. Z-Wave_Thermostat_Add_03_Learned.jpg Z-Wave_Thermostat_Add_05_Name.jpg


  8. Press Add, then Home to exit.

    9. Z-Wave_Thermostat_Add.jpg


Line


2GIG GC2 and Z-Wave Pairing Instructions:

  1. Press Services, then press the Z-Wave logo.

    2. 1_Home_Disarmed.png 2_Z-Wave_Services.png


  2. Press the wrench icon for settings, then enter the default installer code 1561.

    01_Z-Wave_Main.png 02_Enter_Code.png


  3. Press Add Devices, entering the system into Z-Wave learn mode.

    4. 03_Toolbox_Add.png 04_Add_Device_1.png


  • Press the A button on the lock interior one time. The red LED light will illuminate when the lock enters add mode.

    • Obsidian A Button for Add


  • Learning may take up to 2 minutes, press Back or Home to exit.

    • 05_Add_Device_2.png 06_Add_Device_3a.png

    Line


    Interlogix Simon XTi and Z-Wave Pairing Instructions:

    1. Press the gear icon for the settings menu, then press the down arrow several times to reach Programming.

      2. Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg


    2. Press Enter next to Programming, enter your master code, then press Ok.

      3. Enter_Programming_03_Programming_Enter__1_.jpg Enter_Programming_04_Enter_Code.jpg


    3. Press Interactive Services, then press Z-Wave.

      4. Interactive_Services_01_Main_Select.jpg Z-Wave_Add_01_Interactive_Services_Menu.png


    4. Press Add Device to start the learning process.

      5. Z-Wave_Add_02_Z-Wave_Menu.png Z-Wave_Add_03_Add.png


    5. Press the A button on the lock interior one time. The red LED light will illuminate when the lock enters add mode.

      6. Obsidian A Button for Add


    6. The Simon XTi beeps and displays Device XX Added. Press Close several times to exit.

      7. Z-Wave_Add_04_Added.png Main_Screen.jpg


    Line


    Interlogix Simon XT and Z-Wave Pairing Instructions:

    1. Hold the Star button (*) for 10 seconds to open the Z-Wave menu.

      2. Z-Wave_Menu_1.jpg

    2. Hold the 1 key for 10 seconds.

      3. Simon_XT_Z-Wave_Add_02.png


    3. The Simon XT enters Z-Wave learn mode.

      4. Simon_XT_Z-Wave_Add_03.png Simon_XT_Z-Wave_Add_04.png


    4. Press the A button on the lock interior one time. The red LED light will illuminate when the lock enters add mode.

      5. Obsidian A Button for Add


    5. When successful, the Simon XT beeps and displays the number of devices in memory.

      6. Simon_XT_Z-Wave_Add_05.png Simon_XT_Z-Wave_Add_07.png


    6. Hold # for 10 seconds to exit.

      7. Pound_Button.jpg

    Related Articles

    Contact Support