GC2 GoControl - Sensor Test
System Test Instructions
1. Press Security, then Menu.
2. Press Toolbox, then enter your master code.
3. Press System Test. GoControl will enter test mode.
4. Open the door and window sensors, and walk by motion detectors.
5. The GoControl beeps and shows signal strength if all sensors test successfully. Press OK for next steps.
6. Test the home button colors by pressing each test.
7. Press No or Yes. When finished, press the down arrow.
8. Test the emergency button by pressing each test listed, then press No or Yes.
9. Press Sounder Audio Test, then press No or Yes if the internal speaker sounds.
10. If all tests are successful, press Ok. Press Back to exit.